DN191NH_HA1CLL_ENG
DVD PLAYER
OWNER’S MANUAL
MODEL : LDA-731
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
CAUTION:
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for
installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and operating
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
product.
instructions should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use
instructions should be retained for future reference.
11. Only use attachments/accessories specified by the
manufacturer.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
4. Follow all instructions.
-
All operating and use
instructions should be followed.
5. Do not use this product near water. – For example: near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; or near a swimming pool; and other areas
located near water.
6. Clean only with dry cloth. – Unplug this product from the
wall outlet before cleaning. Do not use liquid cleaners.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution when
moving the cart/product combination to avoid injury
from tip-over.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
-
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from over- heating. The openings should
never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
3
Contents
Introduction . . . . . . . . . . . . . . . . . .5-8 Operation . . . . . . . . . . . . . . . . . .16-24
General Features . . . . . . . . . . . . . . . . . . . . . .16
Additional Features . . . . . . . . . . . . . . . . . . . .17
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . .18
Moving to another GROUP . . . . . . . . . . . . .18
Viewing another PAGE . . . . . . . . . . . . . . . .18
Playing an Memory Card . . . . . . . . . . . . . . . .19
Playing an Audio CD or MP3/WMA file . . . . .20
Programmed Playback . . . . . . . . . . . . . . . . .20
Repeat Programmed Tracks . . . . . . . . . . . .20
Erasing a Track from Program List . . . . . . .20
Erasing the Complete Program List . . . . . .20
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .21
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .21
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .21
Moving to another File . . . . . . . . . . . . . . . .21
About the
Symbol Display . . . . . . . . . . . . .5
Symbol used in this Manual . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Handling Discs . . . . . . . . . . . . . . . . . . . . . . .5
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control Operation . . . . . . . . . . . . . .8
Remote Control Battery Installation . . . . . . .8
Installation and Setup . . . . . . . . .9-15
Setting up the Player . . . . . . . . . . . . . . . . . . . .9
DVD Player Connections . . . . . . . . . . . . . . . . .9
Video and Audio Connections to Your TV . . .9
Resolution setting . . . . . . . . . . . . . . . . . . . . .9
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
To rotate picture . . . . . . . . . . . . . . . . . . . . .21
To listen to MP3 music while watching
picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
HDMI connection . . . . . . . . . . . . . . . . . . . .10
Audio Connection to Optional Equipment . .11
Playing a DivX Movie file . . . . . . . . . . . . . . . .22
Controlling Your TV with the Supplied
Displaying Disc Information on-screen . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .12
General Operation . . . . . . . . . . . . . . . . . . .12
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .13
• Menu Language . . . . . . . . . . . . . . . . . . .13
• Disc Audio / Subtitle / Menu . . . . . . . . . .13
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .13
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . .13
• Display Mode . . . . . . . . . . . . . . . . . . . . .13
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Dolby Digital / DTS / MPEG . . . . . . . . . .13
• Sample Freq. (Frequency) . . . . . . . . . . . .13
• Dynamic Range Control (DRC) . . . . . . . .13
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .13
LOCK (Parental Control) . . . . . . . . . . . . . .14
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• Password . . . . . . . . . . . . . . . . . . . . . . . .14
• Area Code . . . . . . . . . . . . . . . . . . . . . . .14
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .15
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .15
• B.L.E. (Black Level Expansion) . . . . . . . .15
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . .15
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Maintenance and Service . . . . . . . . . . . . . . .24
Reference . . . . . . . . . . . . . . . . . .25-26
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26
4
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Symbol Used in this Manual
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
ALL
All discs and file listed below
DVD-V
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
DVD and finalized DVD R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
DivX
M/C
DivX files
Memory Card
5
Types of Playable Discs
Regional Code
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled same
as the rear of the unit or “ALL”.
DVD
(8 cm / 12 cm disc)
DVD audio discs
(8 cm / 12 cm disc)
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or the
disc cannot play.
Video CD (VCD/SVCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
In addition, this unit plays Memory Card, DVD R/RW
and CD-R/RW that contains audio titles, DivX, MP3,
WMA, and/or JPEG files.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs
cannot be played on the unit.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
• This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
6
Front Panel
a
b
c
defg
h
i
j
k
l
a POWER
h Disc Tray
Switches the unit ON and OFF.
Insert a disc here.
b RESOLUTION
i
Z (OPEN / CLOSE)
Opens or closes the disc tray.
You can change the resolution depending on
your TV.
j Display window
Shows the current status of the unit.
c MEMORY
Accesses the menu for memory card.
k MEMORY CARD Slot
Insert a memory card.
d
e
N (PLAY)
Starts playback.
(CF, MD, MMC, SD, MS, MS-Pro, xD)
x (STOP)
l Remote Sensor
Stops playback.
Point the remote control here.
f SKIP (.)
Returns to beginning of current chapter or track or
go to previous chapter or track.
g SKIP (>)
Go to next chapter or track.
7
Remote Control
SCAN (m / M)
Search backward or forward.
POWER
SKIP (. / >)
Switches DVD Player ON and OFF.
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
track.
OPEN/CLOSE (Z)
Opens and closes the disc tray.
0-9 numerical buttons
Selects numbered items in a menu.
PAUSE / STEP ( X )
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
CLEAR
Removes a track number on the
Program List or a mark on the
Marker Search menu.
N (PLAY)
Starts playback.
TV Control Buttons
POWER: Turns the TV on or off.
AV: Selects the TV’s source.
PR/CH +/–: Selects TV’s channel.
VOL +/–: Adjusts TV’s volume.
STOP (x)
Stops playback.
AUDIO
Selects an audio language or an
audio channel.
SUBTITLE
Selects a subtitle language.
ANGLE
Selects a DVD camera angle, if
available.
SETUP
Accesses or removes the Setup
menu.
DVD MENU
Accesses menu on a DVD disc.
MARKER
Marks any point during playback.
TITLE
Displays title menu, if available.
SEARCH
Displays MARKER SEARCH menu.
b / B / v / V (left/right/up/down)
Selects an item in the menu.
PROGRAM
Enter to program edit mode.
DISPLAY
Accesses On-Screen Display.
ZOOM
Enlarges video image.
RETURN (O)
Displays the video CD with PBC.
REPEAT
Repeat chapter, track, title, all.
A-B
Repeat sequence from point A to
point B.
RANDOM
Plays tracks in random order.
RESOLUTION
You can change the resolution
depending on your TV.
Remote Control Operation
Remote Control Battery installation
Point the remote control at the remote sensor and
press the buttons.
Detach the battery cover on the rear of the
remote control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
Caution:
Do not mix old and new batteries and never mix
different types of batteries such as standard, alkaline,
etc.
8
Installation and Setup
Component Video – Connect the COMPONENT
VIDEO OUT/(480p/720p/1080i) jacks on the DVD
Player to the corresponding in jacks on the TV
using an Y Pb Pr cable (C).
Setting up the Player
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
Progressive Scan
• If your television is a high-definition or “digital
ready” television, you may take advantage of
the unit’s progressive scan output for the
highest video resolution possible.
DVD Player Connections
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
• Progressive scan does not work with the
analog video connections (yellow VIDEO OUT
jack and S-VIDEO OUT jack).
• The 720p and 480p resolutions are the
progressive scan applied resolution.
Resolution setting
1. Before you set the resolution, this unit must be in
stop mode. Press STOP to stop playback.
2. Press RESOLUTION once. The current resolution
setting will be appears in the display window.
3. Press RESOLUTION repeatedly to change the
resolution you want.
The available resolution according to the connections
are as shown below.
Available Resolution
OUTPUT CONNECTION
1920 x 1080i
1280 x 720p
720 x 480p
HDMI
VIDEO OUT
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
COMPONENT
VIDEO OUT
720 x 480i
VIDEO OUT
S-VIDEO
Video and Audio Connections
to Your TV
720 x 480i
Notes:
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
• For Video and S-Video connections, resolution must
be set to 480i or 480p by pressing RESOLUTION
button, however Video OUT and S-Video OUT is
always at 480i standard resolution.
S-Video: Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S)
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the
resolution that your TV can accept.
Video – Connect the VIDEO OUT jack on the
DVD player to the video in jack on the TV using
the video cable (V)
• For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back.If the disc is copy protected, it will be
displayed at the 480p resolution without HDMI
cable connection. With HDMI cable connection, the
picture may not be displayed properly.
Audio – Connect the left and right AUDIO OUT jacks
of the DVD Player to the audio left and right IN jacks
on the TV (A) using the audio cables.
Do not connect the DVD Player’s AUDIO OUT jack to
the phone in jack (record deck) of your audio system.
9
HDMI connection
If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable.
HDMI compatible TV
HDMI
1. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
H
2. Connect the HDMI OUT jack on the unit to the
HDMI jack on a HDMI compatible TV or
monitor (H).
3. Press RESOLUTION repeatedly to select the
desired resolution.
Notes :
• Both PCM and Bitstream Audio out is available,
when the sample frequency is set to 48kHz in HDMI
connection.
Rear of DVD player
About HDMI
• If Audio setup is set to bitstream and your TV does
not support Bitstream Audio out in HDMI
connection, audio sound may not output or
distorted.
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High-bandwidth Digital Content Protection).
HDCP is used to protect digital content transmitted
and received.
• When the no sound or noisy sound are output with
HDMI connection, set the Audio option [Dolby
Digital, DTS or MPEG] in the SETUP menu to PCM
or Off.
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
player.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
• If there is noise or lines on the screen, please
check the HDMI cable.
• Not all HDCP-compatible DVI devices will work with
this unit.
• If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
• If the abnormal picture appears on the TV screen,
turn off the unit and then turn the unit on again.
Tips:
• When you use HDMI connection, you can change
the resolution (480i, 480p, 720p, 1080i) for the
HDMI output.
• The HDMI will out at 480p resolution, even if you
set the resolution to 480i on the HDMI connection.
10
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
Audio Connection to Optional
Equipment
receiver, or stereo system, using the audio cables (A).
Connect the DVD player to your optional equipment
for audio output.
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player’s DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (OPTICAL O or COAXIAL X) audio
cable.
Rear of DVD player
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the
audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
O
X
A
Notes:
• If the audio format of the digital output does not match
the capabilities of your receiver, the receiver produces
a strong, distorted sound or no sound at all.
L
R
COAXIAL
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
11
Displaying Disc Information
on-screen
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 13 to 15.
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback
information.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
The items displayed differ depending on the disc
type or playing status.
To go to the next level:
Press B on the remote control.
1 / 3
1 / 12
To go back to the previous level:
Press b on the remote control.
0:20:09
General Operation
ABC
1. Press SETUP. The Setup menu appears.
1 ENG
1 / 1
3D SUR.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
ꢀ Title (Track) – Current title (or track).
number/total number of titles (or tracks).
ꢀ Chapter – Current chapter number/total number
of chapters.
ꢀ Time – Elapsed playing time.
ꢀ Audio – Selected audio language or channel.
ꢀ Subtitle – Selected subtitle.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
ꢀ Angle – Selected angle/total number of angles.
ꢀ Sound – Selected sound mode.
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
Note:
If no button is pressed for a few seconds, the on-
screen display disappears.
5. Press SETUP or PLAY to exit the Setup menu.
12
AUDIO
LANGUAGE
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
Menu Language
Select a language for the Setup menu and on-screen
display.
Dolby Digital / DTS / MPEG
Disc Audio / Subtitle / Menu
Bitstream – Select “Bitstream” if you connect this
unit’s DIGITAL OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or MPEG
decoder.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
Other – To select another language, press number
buttons then ENTER to enter the corresponding 4-
digit number according to the language code list
on page 25. If you enter the wrong language code,
press CLEAR.
Off (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL OUT jack.
Off (for Disc Subtitle) – Turn off Subtitle.
Sample Freq. (Frequency)
DISPLAY
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Check the documentation for your amplifier to verify
its capabilities.
TV Aspect
Dynamic Range Control (DRC)
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible. However, you may wish to
compress the dynamic range of the audio output (the
difference between the loudest sounds and the
quietest ones). This allows you to listen to a movie at
a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Vocal
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
13
Area Code
LOCK (Parental Control)
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 25.
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v / V buttons.
4. Press B and select the second character using
Rating
v / V buttons.
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
5. Press ENTER to confirm your Area code selection.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
Password
You can enter or change password.
1. Select Password on the LOCK menu then press B.
2. Follow step 2 as shown above (Rating).
To change the password, press ENTER when the
“Change” option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTER. The password is cleared.
14
DivX(R) VOD
OTHERS
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
1. Select “DivX(R) VOD” option then press B.
2. Press ENTER while “Select” is selected and the
registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
PBC
Set Playback Control (PBC) to On or Off.
3. Press ENTER to exit.
On: Video CDs with PBC are played according to
the PBC.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
Off: Video CDs with PBC are played the same
way as Audio CDs.
Auto Play
You can set up the unit so a DVD disc automatically
starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search for
title that has the longest playback time and then play
back the title automatically.
Note:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
15
Operations
General features
Buttons
Operations
Discs
ALL
Z (OPEN / CLOSE)
X (PAUSE)
Opens or closes the disc tray.
ALL
During playback, press X to pause playback.
DVD-V
DivX
ALL
DVD-A
VCD
Press X repeatedly to play Frame-by-Frame.
SKIP (. / >)
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD, DivX disc; 4 steps
DVD-V
VCD
MP3
DivX
DivX
ACD
Video CD, MP3, Audio CD ; 3 steps
While the playback is paused, press SCAN M
DVD-V
VCD
repeatedly to play in slow motion (4 steps, forward only).
REPEAT
A-B
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
ALL
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
A and point B and repeats a sequence from point A
(Starting point) to point B (End point).
DVD-V
VCD
VCD
DivX
ACD
Press CLEAR to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (3 steps).
You can move through the zoomed picture using b B v V
buttons. Press CLEAR to exit.
DVD-V
DIVX
WMA
ACD
MP3
RANDOM
TITLE
During playback or in stop mode, press RANDOM for
random playback.
DVD-V
DVD-A
If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appears.
DVD MENU
(ANGLE)
The disc menu appears on the screen.
DVD-V
DVD-V
DVD-A
DVD-A
During playback of DVD disc contains scenes recorded
different camera angles, press ANGLE repeatedly to
select a desired angle.
DVD-V
DivX
(SUBTITLE)
(AUDIO)
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
DVD-V
DVD-A
DivX
During playback, press AUDIO repeatedly to hear a
different audio language or audio track.
VCD
ACD
16
Notes on general features:
Marker Search
DVD-V
VCD
DivX
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 15).
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
• When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
will blink on the TV screen during scenes recorded
at different angles as an indication that angle
switching is possible.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
• The A-B repeat function is available only in the
current track.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
Additional features
3D Surround
4. You can play any marker by inputting its number on
the marker search menu.
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of the
five+ speakers normally required for multi-channel
audio from a home theater system).
Last Scene Memory DVD-V
ACD
VCD1.1
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
DVD-V
VCD
DivX
1. Press DISPLAY during playback.
Note:
2. Use 3 or 4 to select the sound option.
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
The sound option will be highlighted.
3. Use 1 or 2 to to select “3D SUR.”.
To turn off the 3D Surround effect, select “Normal”.
Screen Saver
ACD
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
1. Press AUDIO during playback.
“3D SUR.” appears on the menu screen.
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR.” disappears from the
menu screen.
Time Search DVD-V
VCD
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
17
DVD Audio Discs
Moving to another GROUP
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1. Press DISPLAY during playback on in stop mode.
2. Press 3/4 to select Group icon.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD Player — it is a
function of the disc.
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multi-
channel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
2. Press 3/4 to select Page icon.
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
18
Playing an Memory Card M/C
You can play PHOTO and MUSIC files in Memory
Cards with this DVD player.
1. Insert a Memory Card until it fits into place.
2. Press MEMORY on the front panel.
The Memory Card slot choice menu appears on
the TV screen.
Note:
If both slots are connected with Memory Card,
use b / B to select the desired Memory Card slot.
3. Press ENTER.
The menu appears.
4. Press MEMORY to exit the menu.
For details on each operation item, refer to
relevant page. (See page 20-21)
Cards capable of displaying
Readable Cards
• Compact Flash Card (CF)
• Micro Drive (MD)
• Secure Digital Card (SD)
• Multi Media Card (MMC)
• Memory Stick (MS)
• Memory Stick Pro (MS-Pro)
• eXtreme Digital picture Card (xD)
- Compatible with: FAT 12, FAT 16, or FAT 32
- Only use the memory cards recommended.
Regarding Write Protect
For cards that have a write protect switch, if the switch
is on it will not be possible to write or erase the
contents of the card.
Notes:
• Keep the memory card out of reach of children.
If swallowed, seek medical advice immediately.
• This player can not format a memory card.
• The reading time depends on file size or resolution.
• If a folder in your memory cards have more than
1012 files, the whole files are not available to read.
Caution
Before you extract your memory cards, you should
press the MEMORY button to display the DVD menu
screen. Otherwise you will lose your data in your
memory card or the memory card can be damaged.
19
Playing an Audio CD or
MP3/WMA file
This unit can play Audio CDs or MP3/WMA files
recorded media.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media or
Audio CD, a menu appears on the TV screen.
Press v / V to select a track/file then press PLAY or
ENTER and playback starts. You can use variable
playback functions. Refer to page 16-17.
E
2. Press PROGRAM and the
mark will appear
Note:
Press PROGRAM again to exit the program edit
E
mode, then the
mark will disappear.
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Select the track you want to start playing on the
“Program” list.
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.
6. To resume normal playback from programmed
playback, select a track on the list and then press
PLAY.
[ Song, Artist, Album, Comment, Genre ]
Tips:
Repeat Programmed Tracks
• Press DVD MENU to move to the next page.
Press REPEAT to select a desired repeat mode.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
PHOTO word on top of the menu is highlighted.
Note:
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
If you press > once during Repeat Track playback,
the repeat playback cancels.
Erasing a Track from “Program” List
• Bit rate: within 8 - 320kbps (MP3),
32 - 384 kbps (WMA)
E
1. During STOP mode, press PROGRAM and the
mark will appear
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
2. Use v V b B to select the track that you wish to
erase from the Program list.
3. Press CLEAR. Repeat step 1~3 to erase additional
tracks on the list.
Erasing the Complete Program List
E
1. During STOP mode, press PROGRAM and the
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files in a folder should be less
than 1012 files.
mark will appear
2. Use v V b B to select “Clear All”, then press
ENTER.
Note:
The programs are also cleared when the power is off
or the disc is removed.
20
Zoom
Viewing a JPEG file
During watching pictures, press ZOOM to enlarge the
video image (3 steps).
This unit can play JPEG files recorded media.
You can move through the zoomed picture using b B
v V buttons.
1. Insert a JPEG files recorded media. The PHOTO
menu appears on the TV screen.
Note:
When the resolution is set to 720p or 1080i,
this function is not available.
To rotate picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
To listen to MP3 music while watching
picture
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
1. Insert the disc containing the two types of file in
the player.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
2. Press TITLE to display PHOTO menu.
4. To return to the PHOTO menu while watching
pictures, press STOP.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
Tips:
Playback starts. The playback will continue until
STOP is pressed.
• If you are in a file list and want to return to the
previous Folder list, use v / V buttons to highlight
and press ENTER.
Notes:
• When the resolution is set to 720p or 1080i,
this function is not available.
• Press DVD MENU to move to the next page.
• There are three Slide Speed options
(Fast), >> (Normal) and > (Slow).
: >>>
• This function is not available for Memory Card.
Use v V b B to highlight
select the option you want to use then press
. Then, use b / B to
Tip:
To listen to only the desired music while watching
picture, program the desired tracks from the “MUSIC”
menu and then proceed as above.
ENTER.
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
JPEG disc compatibility with this player is
limited as follows:
• While watching a picture, press RETURN to hide
the help menu.
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc’s contents. If you do not see an
on-screen display after several minutes, some of
the files may be too large — reduce the resolution
of the JPEG files to less than 5 million pixels and
burn another disc.
• When viewing a JPEG file, the help menu will not
be displayed on the TV screen if the resoulution
isset to 720p or 1080i.
Slide Show
Use v V b B to highlight the
(Slide Show) then
press ENTER.
• The total number of files in a folder should be less
than 1012 files.
Still Picture
• Some discs may be incompatible due to a
different recording format or the condition of disc.
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
Moving to another File
• File names without “.jpg” extension will not be
able to be read by this unit. Even though the files
are shown as JPEG image files in Windows
Explorer.
Press SKIP (. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
21
Playing a DivX Movie file
Using this DVD Player you can play DivX file.
DivX disc compatibility with this player is limited
as follows:
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a DivX file recorded media. The MOVIE
menu appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
• If there is impossible code to express in the DivX
file, it may be displayed as “ _ ” mark on the
display.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
You can use variable playback functions. Refer to
page 16-17.
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
GMC?
*
4. Press STOP to stop the playback. The Movie
menu appears
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
Tips:
• If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
remote to highlight
and press ENTER.
Playable DivX file
• Press DVD MENU to move to the next page.
.avi, .mpg, .mpeg
• On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE word
on top of the menu is highlighted.
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
• The disc subtitle may not be displayed properly, if a
DivX subtitle is downloaded through the internet.
• If the Disc Subtitle setup menu does not have the
DivX subtitile language you are going to play, the
subtitle may not be displayed properly.
Playable Codec format
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,
“MP43”, “3IVX”.
Notice for displaying the DivX subtitle
If the subtitle does not display properly during
playback, press and hold SUBTITLE about 3 seconds
then press b / B to select another language code until
the subtitle is displayed properly.
Playable Audio format
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 384kbps (WMA)
• Not all the WMA Audio format is compatible with
this unit.
22
Code numbers of controllable TVs
Controlling Your TV with the
Supplied Remote
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08,56
16,33,37,44,45
70
By pressing
POWER
AV
You can
AKAI
01
NEC
Turn the TV on or off.
Switch the TV’s input source.
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
33
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
18,19
PR/CH +/–
Scans up or down through
memorized channels.
51
CCE
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
VOL +/–
Adjust the volume of the TV.
43
09
49,50,51,52,53,54,55
03,37,44
CORONADO
CROWN
09
11,13
Note:
09
16,17,23
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,03,37,44,69
16,17,23
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
REALISTIC
SAMPO
08
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
Controlling other TVs with the remote
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC 03,10,11,13,37,44
SEARS
09,25,26,27,28,29
64
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
GRADIENTE
HITACHI
JC PENNEY
JVC
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62,93
SIGNATURE 2000
KIOTE
SONY
KMC
09
SOUNDESIGN
SYLVANIA
51
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
KTV
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
LG (GOLDSTAR)
LODGENET
LOGIK
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
46,47
33
11
2. Release TV POWER button.
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
MAGNAVOX
69
08
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
MARANTZ
01,32
MEMOREX
33
XR1000
MGA/MITSUBISHI
01,08,32,34
ZENITH
01,02,33,59
Notes:
•
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
•
•
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default
setting. Set the appropriate code number again.
23
Maintenance and Service
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
24
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose a Area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
Herd and Mcdonald Islands HM
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
HK
HU
IN
ID
IL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
IT
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
JM
JP
KE
KW
LY
LU
PT
RO
El Salvador
Zimbabwe
25
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check the disc indicator
in the display window is lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
No picture.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
•
The power of the equipment connected • Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the AUDIO option to the correct
position, then turn on the DVD player
again by pressing POWER.
• An unplayable disc is inserted.
• The rating level is set.
• Insert a playable disc. (Check the disc
type and regional code.)
The DVD player does
not start playback.
• Change the rating level.
• The remote control is not pointed at
the remote sensor on the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
The remote control
does not work properly.
• The remote control is too far from the
DVD player.
• Operate the remote control closer to
the DVD player.
Specifications
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
General
Power requirements: AC 120 V , 60 Hz
Power consumption: 10W
Dimensions (Approx.):
430 x 35 x 242 mm (17 x 1.4 x 9.5 inches)
(W x H x D) without foot
DIGITAL OUT (OPTICAL) (OPTIONAL):
3 V (p-p), 75 Ω, Optical jack x 1
System
Laser:
Weight (Approx.): 1.9 kg (4.2 lbs)
Semiconductor laser, wavelength 650 nm
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Signal system: NTSC
Frequency response:
Operating humidity: 5 % to 90 %
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
Signal-to-noise ratio:
More than 100 dB (ANALOG OUT connectors only)
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Harmonic distortion: Less than 0.008%
Dynamic range:
More than 95 dB (DVD/CD)
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Accessories:
Video cable (1), Audio cable (1), Remote control (1),
Batteries (2)
AUDIO OUT:
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Note: Design and specifications are subject to change prior notice.
P/NO. : 3834RD0082D
26
|