8 Port Nway Gigabit Ethernet Switch
User Manual
English
LINDY No. 25045
For Home and Office Use
Tested to Comply with
FCC Standards
&
© LINDY ELECTRONICS LIMITED
LINDY-ELEKTRONIK GMBH
-
FIRST EDITION (Jul 2009)
English Manual
Key Features
ꢀ8 Port 10/100/1000M Nway (Auto-negotiation) Switch
ꢀPalm size with metal case
ꢀAuto-learn of networking configurations
ꢀAuto-detect full/half-duplex modes for any port
ꢀDedicated full-duplex 2000Mbps bandwidth
ꢀStore-and-Forward switching methods
ꢀIEEE 802.3x flow control for full-duplex and back-pressure flow control for half-
duplex
ꢀNon-blocking & Non-head-of-line blocking full wire speed forwarding
ꢀAuto-MDI/MDI-X function for any port
ꢀSmart plug & play
Power
Power is supplied through an external DC power adapter.
Front Panel (LEDs)
LED Indicators of 8 Port 10/100/1000M Switch
LED
Power
Status Operation
On
Off
Power is on.
Power is off.
LINK/ACT On
Off
Port is for connection
No connection.
Flashing Data is transmitted or received.
1000M
On
Off
Port is on 1000M status
Port is on 10/100M status.
3
English Manual
Rear Panel (Connections)
Switch/Hub to this 8 Port Gigabit Ethernet Switch
This switch provides automatic crossover detection functionality for any port. It is
simple and friendly to up-link to another switch without crossover cable.
PC/Other devices to this 8 Port Gigabit Ethernet Switch
Via a twisted pair cable straight through, this switch can be connected to PCs,
servers and other network devices.
4
English Manual
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3x Flow control
Number of Ports: 8
MAC Address: 4K
Buffer Memory: 128 KB
Jumbo Frames: 9KB
Features
Transmission Method: Store and Forward
1000Mbps port – 1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Filtering/Forwarding
Rates
10BaseT Cat. 3, 4, 5 UTP/STP
Transmission Media 100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
Per Port: LINK/ACT, 1000M
Per Unit: Power
LED Indicators
Power Supply
Power
Consumption
Dimensions
Weight
DC 5V/2A
7 Watts (Max)
130 x 97 x 24 mm (L x W x H)
0.40 kg
Operating
Temperature
Storage
0 to 55℃
-20 to 90℃
Temperature
Humidity
10 to 90% RH (non-condensing)
FCC Class B, CE
Certifications
5
Radio Frequency Energy, Certifications
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
ꢁ Reorient or relocate the receiving antenna
ꢁ Increase the separation between the equipment and receiver
ꢁ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
ꢁ Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
CE Statement, EMC Compatibilty
This device complies with EN Standards EN55022 and EN55024 according to the relevant EC EMC
Directive. It must be used with shielded cables only to maintain EMC compatibility.
Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU und darf nur zusammen mit
abgeschirmten Kabeln verwendet werden.
LINDY Herstellergarantie
LINDY gewährt für dieses Produkt über die gesetzliche Regelung hinaus eine zweijährige
Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der
LINDY Website aufgelistet bei den AGBs.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste
electrical and electronic equipment. The wheelie bin symbol shown indicates that this product must not
be disposed of with household waste. Instead the product must be recycled in a manner that is
environmentally friendly. For more information on how to dispose of this product, please contact your
local recycling centre or your household waste disposal service. Each individual EU member state has
implemented the WEEE regulations into national law in slightly different ways. Please follow your
national law when you want to dispose of any electrical or electronic products.
More details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und
das Recycling von Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung
im Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt. Dieses Gesetz
verbietet vom 24.März 2006 an das Entsorgen von Elektro- und Elektronikgeräten über die
Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen
zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
LINDY No 25045
1st Edition, July 2009
|