Linear Satellite Radio 3060 User Manual

location of both the transmitter and receiver will affect  
the range. If the transmitter is stowed well out of sight, it  
may be necessary to remove it from its mounting and  
hold near the windshield. Try different locations and  
positions. If operation is still unsatisfactory, the problem  
may be isolated by:  
®
INSTALLATION INSTRUCTIONS  
1 . Checking the door operator. If the door will not  
open when the wall button is pressed, the problem  
is likely to be the operator. If the door will open by  
pressing the wall button, but not when the radio  
control button is pressed, the problem is probably in  
the radios.  
MINI-TRANSMITTER MODEL 3060  
Congratulations! You have just purchased a Mini-Code  
Digital Transmitter, which we believe to be the finest  
product of its kind on the market. With a little care this  
transmitter should provide you with many years of  
excellent service. Please take a moment to read the  
following instructions and you will find that setting your  
new transmitter will be quite an easy matter.  
2. Replacing the transmitter battery. If, after perform-  
ing the above operational checks, the controls still  
do not function, they should be returned to your  
dealer for repair or replacement.  
CAUTION: Any changes or modifications in intentional or  
unintentional radiators which are not expressly approved by  
LINEAR CORPORATION could void the user’s authority to  
operate this equipment. This applies to intentional and  
unintentional radiators certified per part 15 of the F.C.C.  
rules and regulations.  
ACCESSING THE CODE SWITCH AND BATTERY  
COMPARTMENT  
This device complies with FCC Part 15 and Industry Canada  
Rules and Regulations. Operation is subject to the following  
two conditions: (1) This device may not cause harmful  
interference, and (2) This device must accept any  
interference received, including interference that may cause  
undesired operation.  
The model 3060 Mini-Transmitter case is composed of 2  
halves which are held together by a small phillips head  
screw. Removing this screw will allow access to both the  
code setting switch and the battery compartment. (see  
diagram #1)  
LINEAR CORPORATION  
2055 Corte Del Nogal Carlsbad, CA 92009  
Copyright © 2000 Linear Corporation  
214942 B  
 

Lenovo Stereo System 39T9408 User Manual
Leviton Video Gaming Accessories MRS4 User Manual
Lexmark Photo Printer 5770 User Manual
Lexmark Photo Printer Z65P User Manual
LG Electronics Range LRG30357SB User Manual
Lopi Indoor Fireplace Freedom Fireplace Insert User Manual
Magnavox Flat Panel Television 15MF400T 37 Series User Manual
Maxtor Computer Drive 10K V User Manual
Maxtor Computer Drive 100GB User Manual
Midland Radio GPS Receiver GXT700 User Manual