Installation
Platform # 05 Firmware: PKM2
Description: Mazda Transponder Interface: MPV/Miata (PKM2) NO KEY REQUIRED
Manual (1\1 Page)
Functions: Data Transponder Interface: Override OEM Transponder Immobilizer Via Data
Downloadable Firmware for Platform #05: PKG3,PKG8,PKH1, PKH2,PKH3,PKH4,PKHY1,PKM2,PKN2,PKT2
for the firmware that is flashed to the platform you are using.
Section A
See Wire Connection Guide for detailed information regarding wire functionality
Internet
.C.
P
Option A
Firmware Upgrades
USB Cable
USB Adaptor
4 PIN DATA TO DATA (D2D) CABLE (OPTIONAL ACCESSORY)
Option B - Data 2 Data Connection to RCS Data Port
CLEARCODE VIP
DATA PORT
(-)
Brown
Ground When Running
INPUT
UPGRADEABLE
OVERRIDE OEM
TRANSPONDER
IMMOBILIZER
VIA DATA
Green
Blue
N/C
N/C
(+)
N/C
OUTPUT
Ignition ECM Side
Violet/White
Violet
Data (Key Side)
Data (ECM Side)
DATA
DATA
Key
Side
(+)
(+)
Pink/White
Ignition (Key Side)
Ignition (ECM Side)
INPUT
OUTPUT
Pink
MAZDA
IMMOBILIZER
MODULE
B
B
N/C
N/C
(+)
Orange
Red
N/C
INPUT
(+)12 Volt Constant
LED
ECM
Side
(-)
INPUT
Black
Chassis Ground
Immobilizer module is located
under dash on the driver side
to the right of the steering
column.
Programming
button
Section B
WIRE GUIDE: CONNECTIONS
10 PIN HARNESS
D2D = Optional use of 4 Pin Data to Data (D2D) cable will replace the analogue wire (w2w) connection
(-)
/(+)
WIRE
COLOR
PIN#
I/O
STATUS
Connect
Location
D2D
w2w
SPECIFIC WIRE CONNECTION LOCATION
RCS Ground When Running output of remote starter
ACTIVATION and/or FUNCTIONALITY
Immobilizer Bypass Via Data
(-)
1
Brown
D2D
w2w
Input
N/C
N/C
N/C
(+)
N/C
N/C
N/C
2
Green
Blue
Ignition Power Source Supply
w2w Output
Connect in parallel to Pink wire of 10 PIN Harness
3
Vehicle
Connect to Blue/Black Vehicle Data wire (Key Side)
*Data wire in the Miata is Red/Black
Violet/
White
w2w
Data
Vehicle
Vehicle
4
5
Data Commands from Module to Vehicle
w2w
Data
Connect to Blue/Black Vehicle Data wire (ECM Side) Data Commands from Module to Vehicle
*Data wire in the Miata is Red/Black
Violet
(+)
(+)
Ignition Power Source Return
Pink/
White
Connect to Black/White Vehicle Ignition wire (Key Side)
Vehicle
Vehicle
6
7
w2w
w2w
Input
Ignition Power Source Supply
Once connected in parallel to Blue wire of 10 PIN
harness, connect to Black/White Vehicle Ignition wire
(ECM Side)
Output
Pink
N/C
N/C
N/C
(+)
N/C
N/C
8
9
N/C
Orange
Red
D2D
w2w
Input
Vehicle Constant (+) 12 Volt Source
Power Source
(-)
Connect to Black or Black/Orange Vehicle Ground wire
10
Black
D2D
w2w
Vehicle
Input
Ground Source
Legend
RCS = Remote Control System
N/C = No Connection
N/A = Not Applicable W2W= analogue wire to wire D2D= data 2 data
DATA to DATA PORT (D2D): Blue connector of D2D Cable plugs into the upgradeable vehicle interface module.
OPTION A: - D2D Port used to connect to USB Bootloader adaptor & computer to download & flash vehicle interface firmware.
OPTION B: - D2D Port used to connect to the data port of a remote control system equipped with ClearCode Vehicle Interface Protocol.
Remote control systems designed with ClearCode VIP can securely communicate via the D2D cable to transmit & receive data commands which initiate
specific vehicle function such as doorlocks & immobilizer override and /or request information from the vehicle such as status of entry points (doors) or
ambiant température, diesel glow plug etc… ClearCode VIP represents the doorway to vehicle integration...As an enhanced security feature, this upgradeable
vehicle interface module automatically detects when the Vehicle Interface Protocol is present and deactivates the analogue override input wire (brown wire)
ensuring that this module can only be activated by an authorized user.
Section C
VEHICLE PROGRAMMING
1) Once module has been properly connected, press and hold programming button then turn key to IGNITION position, LED should come on solid.
2) Start vehicle by key, LED will begin to flash. Module is now programmed.
*To RESET, press and hold button and plug in module. LED comes on. When LED goes off, release button.
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide.
DISCLAIMER
: Under no circumstances shall
representative or
the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any
any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product are liable for consequential damages
connection with this product neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
sustained in
|