Technical Information
JMB v 1.0 – 8th Dec 2003
V4 Presets and Usage
Introduction.
This document is intended as an introduction to the style of DSP Presets in 861v4, G68 & 568v2.5 -
primarily for customers who are already familiar with earlier Meridian processors such as the 561 or earlier
versions of 568 and 861.
861v4, 861v3.5, 568v2.5 and G68 share the same decoder modes and DSP presets. This is at the point in
time where they incorporate THX UltraII Cinema and Dolby PLIIx.
Basic Preset structure - why have we changed it?
In older products a Preset was linked directly to a type of audio stream. E.g. “Digital” was a Preset for
Dolby Digital multichannel streams only, “Dig THX” added THX extensions to the basic Dolby Digital
mode.
Adding extra processing modes, such as Dolby PLII and THX Surround EX, was beginning to make the
range of options quite complicated - particularly in the GUI, where the user is presented with all of the
possible options at once.
For these reasons the processing performed in Version4 is split into two parts, the decoder and the mode.
The mode is what the user sees as a ‘Preset’, the decoder is automatic and does not require any settings
or adjustment.
This presents a uniform set of options, based on how many channels of audio are actually on the source
medium.
Discrete
Cinema
THX
PLIIx Mov6
PLIIx Mus6
THX EX
THX UltraII
THX Music
Dolby Digital 5.1
DTS 5.1
MPEG 5.1
Multichannel PCM
Multichannel analogue
Decoder
Speakers
Direct
Music
Trifield
Ambisonics
Super Stereo
Music Logic
Mono
TV Logic
PLIIx Music
PLIIx Movie
PLIIx THX
Dolby Digital 2.0
DTS 2.0
MPEG 2.0
2-channel PCM
2-channel analogue
Decoder
Speakers
The decoder mechanism.
The processors automatically select the decoder based on whatever stream is coming in, be it Dolby
Digital, DTS, MPEG or PCM. The stream display exists in the same form as previous processors. E.g.
“DVD AC3 3/2.1 48k”
In this case the decoder part of the product will pass 6 channels of decoded audio to the surround
processing section. The user is then presented with a range of Preset options for 6-channel audio.
Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
Technical Information
JMB v 1.0 – 8th Dec 2003
What types of streams are associated with which Preset category?
Streams in parentheses indicate streams that are decoded in a Meridian DVD player.
Two-channel PCM
Analogue
CD
(MPEG 2/0)
(DTS 2/0 music)
(AC3 2/0)
Music2
(DTS 2/0 movie)
Movie2
Music6
Multichannel PCM
Analogue
DVD-A
(DTS 5.1 music)
(AC3 5.1)
(MPEG 5.1)
(DTS 5.1 movie)
Movie6
Encoded formats
AC3 2/0
MPEG 2/0
DTS 2/0
AC3 5.1
MPEG5.1
DTS 5.1
Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
Technical Information
JMB v 1.0 – 8th Dec 2003
What happened to EX/EZ?
EX and EZ were multichannel Presets that generated an additional mono surround back signal from a
two-surround signal. These have been replaced by Dolby PLIIx Mov6 and PLIIx Mus6, which generate
four surround signals from a two-surround signal.
Can I achieve an equivalent of the old “DTS Music” preset?
Not directly, but you can set up a ‘phantom source’. If you define a source to have audio input ‘last valid’
then switching to it will just apply the new default presets to whatever physical source is currently
selected. A phantom source like this, with the Movie6 Preset set to “Discrete” and the 2+2+2 menu set to
“7.1” would achieve the equivalent functionality.
Can I upsample movies?
Only audio streams that arrive at the processors input as PCM or MHR can be upsampled. The common
way to achieve this is to use a recent Meridian DVD player to decode the audio stream and output to the
processor via a multichannel digital connection.
Can I still force the DTS decoder for sources that play DTS poorly?
Yes, this feature still exists and is configured in the GUI. The decoder will not play any audio unless it is
DTS encoded.
Why aren’t my side speakers playing multichannel audio?
The “Discrete” preset is designed for use with DVD-A multichannel audio streams. There is a parameter in
the Preset called “2+2+2” which tells the processor what to do with the centre/LFE channel pair. This
menu defaults to “5.1”, which means the processor passes the six channels straight through to the
speakers (performing time alignment and bass management on the way). The menu should be set to “7.1”
if you want the side speakers to play audio derived from the surround channels.
Why can’t I add gain to the LFE channel?
THX require that the default gain applied to the LFE channel during their processing is 10dB, but that the
user should see this as +0dB. As such the displayed setting of +0dB is actually applying gain of +10dB.
Discrete is a Music Preset, not subject to THX approval, so the display in this case is allowed to show the
true maximum value, +10dB.
What is Automatic THX-EX switching?
For systems with four surrounds a new setting has been added to THX, THX Music and THX UltraII
Cinema - automatic THX Surround EX switching. If an EX encoded stream is detected in any of these
three modes the processor will automatically use THX Surround EX processing to generate the surround
signals. This will not change the ‘Preset’ chosen, but will change the DSP processing selected. The front
panel ‘Preset’ display will change to show:
“DVD THX Sur.EX 65”.
The user can defeat this automatic switching by setting the “Auto EX?” menu to “no”, in the GUI or from
the front panel. User Presets can be created (based on THX, THX Music or THX UltraII Cinema) with or
without automatic EX switching.
Note that the EX flag is not transmitted via Smart Link, so this feature is not accessible when decoding in
a Meridian DVD player. Play the Dolby Digital bitstream from the Aux output into a two-channel digital
input to utilize this feature.
Meridian Audio Limited, Stonehill, Stukeley Meadows, Huntingdon, Cambs PE29 6EX
Tel +44 1480 445678 Fax +44 1480 445686
|