User’s Guide
910B
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the back cover and quote this information to your
dealer when you require service.
Important Precautions
To Prevent Fire or Hazards:
Always turn the monitor OFF if you leave the room for more than a short period
of time. Never leave the monitor ON when leaving the house.
Keep children from dropping or pushing objects into the monitor's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this monitor.
During a lightning storm or when the monitor is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Do not bring magnetic devices such as magnets or motors near the picture
tube.
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is subject to damage.
Do not use this monitor near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Monitors are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug,
etc.
Place the monitor in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the monitor near or over a radiator or heat source.
Do not install the monitor in a dusty area. It can cause fire.
On Cleaning
Unplug the monitor before cleaning the face of the monitor screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the
monitor screen because overspray may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
A2
Connecting the Monitor
Before setting up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices.
Carefully set the monitor face-down with the underside facing you.
Connecting the Tilt/Swivel stand
1. Align the hooks on the tilt/swivel stand with the matching slots in the base of
the monitor.
2. Insert the hooks into slots.
3. Slide the tilt/swivel stand toward the front of the monitor until the latches click
into the locked position.
NOTE
This illustration depicts the general model of connection. Your monitor may differ from the
items shown in the picture.
Slot
Hook
Latch
Hook
A3
Connecting the Monitor
Using the Computer
1.
Connect the signal cable. When mated, tighten the thumbscrews to secure the
2. connection.
Connect the power cord into a properly power outlet that is easily accessible and
close to the monitor.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your monitor
may differ from the view as shown.
Signal Cable
Power Cord
Detached Type
Attached Type
*
*
Wall-outlet type*
*
Varies according to model.
PC-outlet type*
PC
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
A4
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the monitor on or off.
This Indicator lights up green when the monitor
operates normally. If the monitor is in DPM
(Energy Saving) mode, this indicator color changes
to amber.
Power (DPMS)
Indicator
MENU (or OSD)
Button
Use this button to enter or exit the on screen
display.
Use these buttons to choose or adjust items in
the on screen display.
Buttons
SELECT (or SET)
Button
Use this button to enter a selection in the on
screen display.
Control
Direct Access Function
Button
Button
Bring up Contrast adjustment
Bring up Brightness adjustment
The Contrast and Brightness functions are also available in the
On Screen Display (OSD) menu.
A5
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use of
the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Case 1
Case 2
Press the MENU (or OSD) Button, then the main menu of the OSD
appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the SELECT (or SET) Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the SELECT (or SET) Button.
Exit the OSD by Pressing the MENU (or OSD) Button.
A6
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
Sub menu
Brightness
Reference
To adjust the brightness and
contrast of the screen
BRIGHTNESS/
CONTRAST
Contrast
V Position
H Position
To adjust the position of the
screen
POSITION
SIZE
V Size
H Size
To adjust the size of the screen
Tilt
To adjust the shape of the screen
Side Pincushion
S Pincushion Balance
Parallelogram
Trapezoid
SHAPE
H Corner
Top Corner
Bottom Corner
PRESET 6500K
9300K
To customize the color of the
screen
COLOR
Temp
R/G/B(User Color)
Video Level
Language
OSD Time
To customize the screen status
for a user's operating environment
SETUP
Degauss
Recall
To improve the clarity and
stability of the screen
SPECIAL
Reset
Moire H Moire
V Moire
Convergence *
Purity
: Adjustable
A7
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
NOTE
The order of icons may differ depending on the model (A8~A11).
To adjust the brightness and contrast of the screen
OSD Adjust
Description
Brightness
To adjust the brightness of the screen.
Contrast
To adjust the contrast of the screen.
To adjust the position of the screen
OSD Adjust
Description
Vertical Position
To move image up and down.
Horizontal Position
To move image left and right.
A8
On Screen Display(OSD) Selection and Adjustment
To adjust the size of the screen
OSD Adjust
Description
Vertical Size
To adjust image height.
Horizontal Size
To adjust image width.
To adjust the shape of the screen
OSD Adjust
Description
Tilt
To correct image rotation.
Side Pincushion
To correct a concave or convex bowing of
the image.
Side Pincushion Balance
To correct the balance of both sides
bowing.
Parallelogram
To correctly adjust the skew of the image.
Trapezoid
To correct geometric distortion.
H Corner*
Top Corner*
Bottom Corner*
To correct an irregular distortion of the
displayed image.
* This function is available for
designated models only.
A9
On Screen Display(OSD) Selection and Adjustment
To customize the color of the screen
OSD Adjust
Description
6500K/ 9300K
PRESET
TEMP
Select the screen color.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Select the screen temperature which you
prefer among reddish or bluish or any color
in between.
RED
GREEN
BLUE
Set your own color levels.
To customize the screen status for a user's operating environment
OSD Adjust
Description
VIDEO LEVEL This item is used to select the monitor's
input signal level. The normal level used for
most PCs is 0.7V.
If the screen becomes suddenly washed-
out or blurred, please select 1.0V and try
again.
LANGUAGE To choose the language in which the
control names are displayed.
OSD Menus are available in 12 languages:
English, German, French, Spanish, Italian,
Swedish, Finnish, Portuguese, Korean,
Chinese , Russian and Polish.
OSD TIME
Set the OSD time, i.e. the length of time a
menu will remain on-screen before it shuts
off automatically. Adjust the time to 5, 10,
20, 30 or 60 seconds.
A10
On Screen Display(OSD) Selection and Adjustment
To improve the clarity and stability of the screen
OSD Adjust
Description
DEGAUSS To manually demagnetize the screen to
avoid showing incorrect images or colors.
RECALL You can use this function to reload the
modified parameters for screen display
operation, as specified by the user after
purchase: Position, Size, Side Pincushion,
Trapezoid (These recalled options may differ
depending on the mode selected: Preset,
User, or New).
If you don’t want to recall the monitor to
these modified settings, use the
button
to select CANCEL and then press the
SELECT (or SET) button.
RESET
Return to all factory default settings except
"LANGUAGE": Brightness, Contrast, Tilt,
Color 9300K, Video Level, OSD Time, Moire,
Purity (These reset options may differ
depending on the mode selected: Preset,
User, or New).
If you don’t want to reset the monitor, use the
button to select CANCEL and then
press the SELECT (or SET) button.
MOIRE
This item allows you to reduce the degree of
moire. (Moire is caused by interference
Horizontal Scan Line with the periodical dot
screen). It is normally OFF(H:0/V:20).
The moire adjustments may affect the focus
of the screen.
Moire adjustments may shake slightly while
the moire reduction function is on.
This is to adjust the alignment of red
and blue fields.
CONVER-
GENCE*
* This function is available for
designated models only.
Use to adjust the purity on the screen
if the color appears uneven.
PURITY*
A11
Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the
monitor connected?
Check and see if the power cord is connected properly to
the power outlet.
Is the power indicator light
on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness and the contrast.
Is the power indicator
amber?
If the monitor is in power saving mode, try moving the
mouse or pressing any key on the keyboard to bring up
the screen.
Do you see an "OUT OF
FREQUENCY" message
on the screen?
This message appears when the signal from the PC
(video card) is out of horizontal or vertical frequency
range of the monitor. See the 'Specifications' section of
this manual and configure your monitor again.
Do you see a "SELF
DIAGNOSITICS" message
on the screen?
This message appears when the signal cable between
your PC and your monitor is not connected. Check the
signal cable and try again.
The screen is flickering.
Is the vertical frequency
less than 70Hz or is your
monitor set to the
Set the vertical frequency to 72Hz or higher, and
consult the video card user manual for instructions on
converting to a non-interlaced mode.
(You can set this option under the Display icon of the
Control Panel.)
interlaced mode?
Do you have any
magnetic material such
as adapter, or high-
voltage line near to your
monitor?
Remove magnetic sources, such as power
adapters, speakers, or high-voltage lines, away from
the monitor.
Do you hear a "~ding"
sound while the monitor
is flickering?
Use the normal degaussing function. This function
clears the screen and reduces any screen blur that
may occur due to the surrounding magnetic field. The
screen may flicker for about 5 seconds, accompanied
by a "~ding" sound.
A12
Troubleshooting
The screen color is not normal.
Do you see basic
discoloration (16 colors)?
Set the color depth to 256 colors or higher: use 'Control
Panel' 'Display' 'Settings' 'Color Palette'
Is the screen color unstable
or monochrome?
Check the connection of the signal cable. Or pull out the
video card of the PC and insert it again.
Do you see black dots on
the screen?
This is due to a small amount of foreign or abnormally
florescent material that became fastened on the mask
during manufacturing. It will not affect product
performance.
Do you see a partial
blurring on the screen?
This happens due to interference from surrounding
magnetic fields, as created when speakers, steel
structures, or high-voltage lines are placed near the
monitor. Remove any such materials from the
immediate vicinity and use the DEGAUSS icon on the
screen adjustment menu to fix the screen.
I see an after-image on the screen.
Do you see the after-image
even when you turn off
the monitor?
A premature aging of the monitor pixels may cause the
prolonged display of a single image on the screen. Be
sure to use a screen saver to maximize the service life of
the monitor.
I see waves on the screen.
Do you see the wave
directly on the screen?
This occurs in inverse proportion to the screen focus,
which can be caused by a particular frequency or video
card. Brighten the screen and use the 'MOIRE' icon on
the screen adjustment menu to adjust the screen.
Have you installed the monitor driver?
Have you installed the
monitor driver?
Be sure to install the monitor driver from the monitor
driver CD (or diskette) that comes with your monitor. Or,
you can also download the driver from our web site:
A13
Specifications
Picture Tube
19 inches (18.0 inches viewable)
90 degree deflection
0.26mm dot pitch
ARAS(Anti-Reflective Anti-Static) coating
Sync Input
Horizontal Freq. 30 - 98kHz (Automatic)
Vertical Freq.
Input Form
50 - 160Hz (Automatic)
Separate TTL, Positive/Negative
CompositeTTL, Positive/Negative
15 pin D-Sub Connector
Signal Input
Input Form
Video Input
Resolution
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive
Max Flicker Free VESA 1600 x 1200@75Hz
Recommend
VESA 1280 x 1024@85Hz
Plug&Play
DDC 2B
83W
Power
Consumption
Normal
Stand-by/Suspend ≤ 8W
DPM Off
≤ 3W
Dimensions
&Weight
(with tilt/ swivel
stand)
Width
Height
Depth
Net
43.50 cm / 17.1 inches
43.90 cm / 17.3 inches
46.00 cm / 18.1 inches
19.0 kg (41.9 lbs)
Europe
Others
AC 200-240V~ 50Hz 1.0A
AC 100-240V~ 50/60Hz 2.0A
Power Input
The products should be used according to the Power
requirements of each ID LABEL.
Operating Conditions
Environmental
Conditions
Temperature
Humidity
0˚C to 40 ˚C
10 % to 90 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached( ), Detached ( O )
Attached( O ), Detached (
Wall-outlet type or PC-outlet type
Tilt/Swivel Stand
Signal cable
Power cord
)
NOTE
Information in this document is subject to change without notice.
A14
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
43.269
53.674
68.677
91.146
VESA
VESA
VESA
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
85
85
85
85
2
3
4
A15
Digitally yours
|